Firma Force Pty Ltd
Cleaning, Sealing and Coating
Authorized Dealer of
ROOF HEAT REFLECTIVE COATINGS
SUPERTHERM is a water-based thermal heat block coating which contains 4 specific ceramics that work together unlike any other product on the market – two micron sized ceramics are reflective for UV and visual light, the third blocks the infrared solar heat energy and the fourth acts as a non-conductor for emissivity to stop solar heat load making it a safe, high performance and effective energy friendly solution. The ceramics have been tested to block:
-
97% of Ultraviolet Radiation (UV) (3% of total solar heat)
-
92% of Visual Light (Short Wave Radiation) (44% of total solar heat white reflected; black absorbed)
-
99.5% of Infrared (Long Wave Radiation) (53% of total solar heat)
-
Block heat load non-conductor – (Emissivity blocks Heat Load)
Benefits of SuperTherm:
-
Reduce Electricity A/C cost
-
Reduce fuel for refrigerated transport
-
Reduce Roof Thermal Shock
-
Reduce Urban Heat Island Affect
-
Reduce CO2 emissions
-
Assist Global Warming Target Reduction
-
Environmentally Friendly - Water Based Product
-
Guaranteed for 20 years, lasts up to 35 years
Our Ceramic based products blocks 96.1% of the sun's heat, cools your roof temperature down with up to 40°C help save you electricity on cooling down your house/office workshop and more...lasts up to 30 years.
CORROSION TREATMENT AND PREVENTION
Rated No 1: Rust Grip® is a high performance, tough, aluminium based, moisture cured polyurethane encapsulation coating. Encapsulate corrosion, lead paint, asbestos and biohazards.
Aluminium; Not Zinc is the future!
...extend lifespan of already corroded metals...up to 20 years.
THE FUTURE IN CORROSION PREVENTION AND TREATMENT IS ALUMINUM NOT ZINC
Cover over existing rust, no more expensive sand blasting. Imagine 3 days work in a single day, at half the price and double the corrosion protection performance!
Think it’s too good to be true…it’s possible with Rust Grip®!
Rust Grip’s coating premium advantages are:
-
One-Coat System
-
Limited Surface Preparation
-
Encapsulation
-
High Surface Tensile Strength
-
Encapsulate Corrosion, Mill Scale, Pack Rust, Lead-based paint, Asbestos and Bio-hazardous materials.
Hot Pipe and Boiler Coating
Block Heat! 7 Ceramics Thermal Insulation Coatings!
The Original & Proven Hot Pipe Multi-ceramics Closed Film Coating. Get “high” heat protection that surpasses conventional insulation with HPC® Coating, HPC®-INT and HPC® HT Coating.
HPC® (Hot Pipe Coating) is a ceramic based, water-borne insulating coating designed to insulate in high temperature situations from ambient to 650°C. Use HPC® as an insulation to block heat loss, save energy, reduce maintenance, stop CUI (Corrosion Under Insulation), reduce landfill and personnel protection.
​
HPC® Standard – Ambient up to 204°C / 400°F
HPC® Coating is water-borne and extremely lightweight in appearance. It uses a special acrylic resin blend with specific ceramic compounds added to provide a non-conductive block against heat transfer.
HPC®-INT – 204°C / 400°F up to 426°C / 800°
HPC®–INT Coating is designed to control heat transfer on surface. It’s water-borne and extremely lightweight in appearance. HPC®–INT Coating uses a special acrylic/silicone resin blend with specific ceramic compounds added to provide a nonconductive block against heat transfer.
HPC®-HT – 426°C / 800°F up to 650°C / 1200°F
HPC®–HT Coating is a two-part hybrid silicone/solvent resin (Part A and B is a water-based resin system) using specific ceramic compound loads for application directly over surface temps of 426°C (800°F) and up to 650°C (1200°F). It is designed to block and hold the interior temperature on the surface and reduce conductive heat transfer loss.
​
NOTE: A prescribed thickness is required for specific temperature and duration of protection.
​
HPC received EPA Energy Star Energy Savings award with 49% Energy savings.
iHPC is constructed to prevent the loss of conductive and radiant heat from pipes and vessel surfaces. It can be applied to live pipes, reduce need for shutdown and quicker applicationn times. With increase in energy cost input, greenhouse decarbonisation, personnel protection and CUI prevention HPC address all the above.
Refrigerated Transport Indusatry
and Fuel Saving for Trucking Industry
Saving up to 40% fuel cooling down refrigerated transport by reflecting heat away, not absorbing through insulation and then cooling...
Our AirTabs reduce the base pressure or suction drag at the rear of trailers, RVs, buses or straight trucks, reducing fuel consumption of 2-10% for interstate and long-distance trucking.
AND MORE...
​
Firma Force specialize in offering our clients market leading products to overcome daily challenges specific to each industry and/or need. Our solutions will be Client and Industry specific, with consultation to provide best approach to remedy the problem.
We offer industry leading solutions with proven lean manufacturing and project management methodologies, offering savings related to ongoing expenses that returns little to no productivity. We have partnered with suppliers that offers products that have been tested and proven in real life applications.
All our products and services are offered with a Three prong approach:
-
save electricity and fuel cost.
-
extend the lifespan of asset and increase capital return on existing asset.
-
eliminate/reduce ongoing routine maintenance and operational cost savings from day 1.
Please select which Industry below you request information for. Our products and solutions will be discussed in depth with the client to suit their budget, objectives and expectations.
-
Transport- Refrigerated and long haul
-
Residential
-
Commercial/Industrial/Retail
-
Agriculture livestock/Grain storage
-
Architecture
-
Aviation
-
Construction
-
Cold & Cool Storage
-
Energy & Mining
-
Marine
-
Military
-
Shipping Containers
-
Transportation
-
Warehouses